Meyer® ST-Series snowplows are perfectly sized for homeowners and residential contractors driving ½-ton vehicles. These rugged, snowplows deliver all the strength and efficiency needed for light duty applications. STs are available in poly and steel moldboards.

The Meyer® TM-Series is designed to fit the weight limitations of smaller sport utilities and light-duty pick-ups, without sacrificing performance. The TM Series are built to last for years of light-duty use. TMs are available in both steel and poly moldboards.

Both the ST-Series & TM-Series have full-trip moldboards designed to give way, absorbing the impact caused by snow-covered objects, protecting the equipment and ensuring operator safety. These plows are easy to maintain and will last for years – it’s exactly what homeowners need from their plow.

Ideal for both personal and professional use, EZ-Mount Plus makes it easy to turn your work truck into your everyday truck, thanks to its one-part system. The lift frame, lights, hydraulic power system and moldboard are combined as one unit. It conveniently attaches or detaches in well under a minute, and leaves the vehicle with an off-the-assembly-line appearance when not attached. Simply disconnect one power plug, pull two pins, back up and you’re on your way.

Both the ST and TM-Series moldboards can be attached using the time-tested EZ-Mount® Classic™ mounting system. Although the TM Series can be used with EZ-Mount Plus, it traditionally is paired with the EZ-Mount Classic mounting system.

 

All STs and TMs come standard with ergonomically-designed pistol-grip controllers. This controller features intuitive, back lit buttons that easily control all functions of the plow with the push of just one button per function. On the backside of the controller are diagnostic instructions that make trouble-shooting easier.

Is the pistol grip not your style? Meyer also makes optional joystick and touch pad controllers with the same easy-to-use features and diagnostics. See the “Accessories” tab for details.

Full-trip Steel Cutting Edges (standard equipment)
Meyer steel cutting edges are scientifically designed to meet the demands of a tough environment. Our unique, heat-treated specifications are derived from years of testing to provide long-lasting performance. Meyer moldboards and cutting edges are pre-drilled ready for installation. Cutting edges are sold as complete kits or separately as required.

Plow Size / Type	Complete Kit	Cut Edge Only	Hardware Only
TM 5.0 ft. Steel	08172	09294	08222
TM 6.0 ft. Steel	08173	09104	08222
TM 6.5 ft. Steel	08174	09100	08222
TM 7.0 ft. Steel	08177	09105	08222
ST 7.0 ft. Steel	08177	09105	08222
STL 7.5 ft. Steel	08226	09257	08222
STP 7.5 ft. Poly	08178	09796	08222
ST 7.5 ft. Steel	08178	09796	08222

Full-trip Rubber Cutting Edge Kit
Today’s pros are faced with low-noise requirements and a variety of delicate surfaces. Meyer rubber cutting edges are designed to eliminate noise while providing maximum protection to the surface. Our 1.5” thick edge is formulated for long life. All Meyer rubber cutting edges are also reversible to extend cutting edge life, once a side is worn, simply reverse it for extended use. Meyer moldboards and cutting edges are pre-drilled ready for installation. Cutting edges are sold as complete kits or separately as required.

Plow Size / Type	Complete Kit	Cut Edge Only	Hardware Only
TM 6.0 ft. Steel	08237	13077	08224
TM 6.5 ft. Steel	08186	12433	08224
TM 7.0 ft. Steel	08188	12435	08224
ST 7.0 ft. Steel	08188	12435	08224
STP 7.5 ft. Poly	08189	12436	08224
ST 7.5 ft. Steel	08189	12436	08224

Full-trip Polyurethane Cutting Edge Kit
Today’s pros are faced with many requirements and stipulations from their customers. Polyurethane cutting edges provide the rigidity of steel edges, and the noise reduction of rubber edges, all while protecting sensitive surfaces. Our one-inch thick edge is formulated for long life. Meyer moldboards and cutting edges are pre-drilled ready for installation. Cutting edges are sold as complete kits or separately as required.

Plow Size / Type	Complete Kit	Cut Edge Only	Bar Strap Only	Hardware Only
TM 6.0 ft. Steel	08116	09281	13055	08224
TM 6.5 ft. Steel	08117	09269	13056	08224
TM 7.0 ft. Steel	08118	09267	13057	08224
ST 7.0 ft. Steel	08118	09267	13057	08224
STP 7.5 ft. Poly	08119	09224	13058	08224
ST 7.5 ft. Steel	08119	09224	13058	08224

Meyer Heavy-duty Deflectors
Made of rigid polyethylene, reduces blow-back on the windshield, and accentuates the snow rolling action. The 45 degree angle end-cut helps throw snow more precisely and quicker for a cleaner scrape. Meyer moldboards are pre-drilled and ready for deflector installation. Deflector complete kits come ready-to-install with hardware bag and steel mounting belt. Components also sold separately as required.

Plow Size / Type	Complete Kit	Deflector Only	Bar Strap Only	Hardware Only
TM 6.0 ft. Steel	12036	12044	12028	08612
TM 6.5 ft.Steel	12037	12045	12486	08612
TM 7.0 ft. Steel	12038	12046	12030	08614
ST 7.0 ft. Steel	12038	12046	12087	08612
ST 7.5 ft. Steel	12039	12047	12487	08614

Meyer Rubber Snow Deflectors New!
Made of pliable rubber, keeps snow flume down and away from the windshield and accentuates the snow rolling action. Meyer moldboards are pre-drilled and ready for deflector installation. Deflector complete kits come ready-to-install with hardware bag and steel mounting belt. Components also sold separately as required.

Plow Size / Type	Complete Kit	Deflector Only	Bar Strap Only	Hardware Only
TM 6.0 ft. Steel	08103	13406	12028	08612
TM 6.5 ft.Steel	08106	13047	12486	08612
TM 7.0 ft. Steel	08108	13049	12030	08614
ST 7.0 ft. Steel	08108	13049	12087	08612
ST 7.5 ft. Steel	08109	13050	12487	08614

Meyer Poly Snow Deflectors
Made of pliable poly, keeps snow flume down and away from the windshield and accentuates the snow rolling action. Meyer moldboards are pre-drilled and ready for deflector installation. Deflector complete kits come ready-to-install with hardware bag and steel mounting belt. Components also sold separately as required.

Plow Size / Type	Complete Kit	Deflector Only	Bar Strap Only	Hardware Only
TMP 6.0 ft. Poly	12466	12470	12486	08612
TMP 7.0 ft. Poly	12089	12088	12087	08612
STP 7.5 ft. Poly	12078	12073	12487	08614

Joy Stick Controller with ALM/ARM
Operates with straight blades and V-plows. Controller is illuminated and automatically senses the blade type (V or Straight blade); also equipped with self-diagnostics. ALM/ARM--To reduce effort and increase performance and safety, Meyer has made basic operation of the plow automatic! The ARM mode automatically raises the plow when the operator shifts the vehicle to reverse. The ALM mode automatically lowers the plow when the operator shifts the vehicle in reverse. Unit comes with instructions and adapter for an easy do-it-yourself install.
The contour shape conveniently fits on the operator's leg when using the leg strap.  Learn more

Joy Stick	Leg Strap
22790X	22265C

 Note: Scroll down to view Meyer controller mounting accessories.

Pistol Grip Controller with ALM/ARM
Meyer’s pistol grip controller, featuring automatic raise mode (ARM) and automatic lower mode (ALM). ALM/ARM--To reduce effort and increase performance and safety, Meyer has made basic operation of the plow automatic! The ARM mode automatically raises the plow when the operator shifts the vehicle to reverse. The ALM mode automatically lowers the plow when the operator shifts the vehicle in reverse. It features one-button functionality, illuminated buttons and self-diagnostics. This pistol grip controller retrofits back to replace Meyer Touch Pad Controller ( 22154). Unit comes with instructions and adapter for an easy do-it-yourself install.  Learn more

Pistol Grip	Leg Strap
22690X	22265C

 Note: Scroll down to view Meyer controller mounting accessories.

Pistol Grip DLX Controller with ALM/ARM
The Pistol Grip DLX operates MEYER straight & Super-V plows. It features automatic raise mode (ARM) and automatic lower mode (ALM). ALM/ARM--To reduce effort and increase performance and safety, Meyer has made basic operation of the plow automatic! The ARM mode automatically raises the plow when the operator shifts the vehicle to reverse. The ALM mode automatically lowers the plow when the operator shifts the vehicle in reverse. It features one-button functionality, illuminated buttons and self-diagnostics. This pistol grip controller retrofits back to replace Meyer Touch Pad Controller ( 22154). Unit comes with instructions and adapter for an easy do-it-yourself install. Learn more

 

Pistol Grip	Leg Strap
22695X	22265C

 Note: Scroll down to view Meyer controller mounting accessories.

Touch Pad Controller
Intuitive design with large illuminated raised rubber indicator arrows for ease of use. Unit features self-diagnostics. Convenient indicator lights make it simple to see the status of the plow. Unit comes with instructions and hardware for an easy do-it-yourself install.

Touch Pad	Leg Strap
22154	22265C

Slik-Stik Controller
Meyer's Slik-Stik Controller features easy fingertip operation for fast positive response and total electric control.  Slik-Stik can be located for operator preference:  on the floor shift selector, on the steering column shift selector, on the dash right or left, or on the floor pedestal or console.

Slik-Stik Complete Kit	Slik-Stik Replacement
08574	22092

Joystick Cradle Mount                                                                  Joystick Cradle mount is custom designed for the Meyer Joystick Controller.  The unique design allows the joystick to snap into place docking the unit in a safe and useful position.  It mounts virtually anywhere on the dashboard or with the Floor Mount (sold separately).  Installation is quick and easy.  Joystick Cradle mount comes with mounting hardware for an easy do-it-yourself install.  

  

Joystick Cradle Mount

22799

Pistol Grip Cradle Mount
The pistol Grip Cradle mount is custom designed for any Meyer Pistol Grip Controller.  The unique design allows the Pistol Grip to snap into place docking the unit in a safe and useful position.  It will mount to the dashboard or with the Floor Mount (sold separately) with convenient mounting screws that come with the Pistol Grip Cradle Mount.  Installation is quick and easy.  Unit comes with mounting hardware for an easy do-it-yourself install.
 

Pistol Grip Cradle Mount

22798

45-Degree Cradle Adapter

The 45-Degree Cradle Adapter provides added flexibility and functionality to your mounting placement.  The 45-degree angle adapter positions your controller in a more convenient location depending on the mount location you desire.  This angle adapter works with both the Pistol Grip and Joystick Cradle Mounts.  The unit mounts to the dashboard with heavy-duty grip tape or screws.  Installation is quick and easy.  Unit comes with mounting hardware and tape for an easy do-it-yourself install.
 

45-Degree Cradle Adapter

22815

Floor Mount 
The Meyer articulating Floor Mount provides maximum ergonomic flexibility to mount the controller close to the operator.  The 10" flex-articulating arm moves virtually wherever the operator desires.  Works perfectly with all three models:  Joystick, Touch Pad and Pistol Grip.  The unit mounts conveniently to the floorboard.  Unit comes with mounting hardware for an easy do-it-yourself install.
 

Floor Mount

22801

Use state-of-the art design to maximize visibility and safety.

Features include:

• Four head lamp system for superior forward and a wide curbside beam pattern for safer, easier & more productive plowing
• Complex reflector headlight system- allows more light energy from the headlight bulb to be used to light the road
• Large access rear door-makes bulb replacement easy
• High output harness system-ensures that maximum electrical energy is transmitted to the headlight system
• Single bolt adjustable mounting-allows faster installation and adjusting when necessary. Lights ship as a left & right set, including all hardware and instructions for a quick installation:

Lights Only

07549 (plug & play installation)

Lights & Modules

07550 (new installation)

Central Hydraulic Kit
The Meyer Industrial-duty Central Hydraulic Kit allows you to plumb the Plow directly to the vehicle’s hydraulic system. Central Hydraulics provides quick operation, are easy to maintain & install and don’t require the purchase of independent hydraulics. The Kit comes complete with two (2) municipal duty angling rams, a lift ram cylinder (1), complete hardware kit and installation instructions.

Central Hydraulic Kit

08878

Meyer Hydraulic Cover & Locking Strap
Protect your valuable Hydraulic unit from the harsh elements with Meyer’s contoured molded cover. Designed for durability and functionality the sub-zero composite fits snugly over the hydraulic unit for maximum protection. All unit maintenance and feature functions can be accessed conveniently while the cover is on. Fits Meyer E-57 and E-58 Series Hydraulic units. Must order Cover (15630) and Locking Strap (15631).

Meyer Hydraulic Cover

15630 & 15631

Meyer Hydraulic Lock
Prevent your valuable Hydraulic unit from theft with our Stainless Steel Hydraulic Lock. 3' locking pin replaces existing bolt, works on all Meyer hydraulics. Quick disconnect/connect design makes changes fast and easy. Lock comes with a set of keys (2) complete with instructions for quick & easy installation.

Meyer Hydraulic Lock

07695C

Snow Shoes TM & STL
Meyer TM & STL Snow Shoes are designed to set the scrapping height of the cutting edge. It is common for the edge to run ½”-1” higher than the surface when plowing gravel driveways/lots or other ground sensitive surfaces. The TM & STL shoe is heavy duty steel-formed for maximum longevity and durability. The mushroom design will rotate 360 degrees eliminating hang-ups or catching of unwanted objects. In addition, the mushroom design is convenient for back-dragging applications. Fits all TM & STL moldboards. Shoes come per each (1) and include all mounting hardware for easy installation.

Snow Shoes TM & STL

09127 (fits TM, TML & STL series)

Snow Shoes ST                                                                        

Meyer ST Snow Shoes allows the user to set the scraping height of the cutting edge.  The shoe is a heavy-duty steel cast for maximum longevity and durability.  Shoes come as one (1) each and include all mounting hardware for easy installation.   
 

Show Shoes ST

09126

Plow Markers
Meyer’s heavy duty plow markers allow the operator to see the edge of his plow from the cab providing maximum visibility for increased performance and safety. They are made from solid tubing and are flexible, but durable to withstand the winter environment. Markers are pre-drilled to fit the moldboard, no drilling is necessary. Markers are shipped two (2) per set and include all mounting hardware and instructions for easy do-it-yourself installation.

Plow Markers

09916

Meyer Receiver Hitch Cover
This all-steel, powder painted hitch cover is a perfect companion to your receiver hitch. Hitch covers keep unwanted debris and elements from corroding the hitch, thus extending the life. The Meyer cover fits in a standard 2”x2” receiver hitch and is easily removable with a convenient locking pin. Unit ships per each.

Hitch Cover

03569

Meyer Winch Cradle
For maximum 4-Season flexibility Meyer offers a Winch Cradle that conveniently fits to the plow mounting system when the plow is removed. The Winch Cradle fits most Ramsey and Warn winches (under 10,000lbs.) with a 10”x 4.5” bolt pattern. Unit comes complete with all mounting hardware and instructions. Easy to assemble and install. (Winch Cradle does not include the winch)

Meyer Winch Cradle

16529 (EZ-Plus & MDII)

16527 (TM Classic)

16533 (TM Jeep Only)

16528 (EZ-Classic)

16542 (2"x2" Rear Receiver Hitch)

Brush Guards – EZ-Mount Classic
“Dressing up” your EZ-Mount Classic is easy and convenient with our optional Brush Guards. Converts your EZ-Mount Classic into a fully functional Brush Guard system. Comes complete as one (1) unit.

Brush Guards

11559 (EZ-Mount Classic with smaller/TM- 11275 lift frame)

11937 (Jeep – EZ-Mount Classic/TM-11545 lift frame)

Brush Guard & Light Guards - EZ-Mount Plus
"Dressing up" your EZ-Mount Plus is easy and convenient with our optional Brush Guard & Light Guards. The Brush Guard converts your EZ-Mount Plus into a fully functional Brush Guard when your plow is off the truck. Comes complete as one (1) unit. Light Guards sold separately come as a set (left & right).

Brush Guard:

08300 (EZ-Mount Plus)

Light Guards – Fit onto the 08300

16536 ('99'-'07 Ford)

16537 ('99+ Chevy)

16539 ('99+ Dodge)

Light Guards – EZ-Mount Xpress
“Dressing up” your EZ-Mount Xpress is easy and convenient with our optional Light Guards. Light Guards conveniently bolt on to your EZ-Mount Xpress lift frame. Comes complete as a set (1-left & 1 right) includes mounting hardware and easy do-it-yourself installation instructions.

Light Guards

16536 ('99'-'07 Ford)

16537 ('99+ Chevy)

16539 ('99+ Dodge)

The Big Yellow Box
The Meyer Big Yellow Box is the perfect companion for your fall, spring, summer and winter needs. The unit features 8 cubic feet of storage and is made of double walled polymer that is virtually indestructible. Perfect for storing: Sand/Salt, Power Tools, Sports equipment, Pool supplies and tools or garbage. Unit will not rust and comes lock-ready. (Lock is sold separately) Forklift pockets are built-in to move the unit when full of material. Unit is 32”W x 23”D x 30”H. No assembly required.
Learn more

The Big Yellow Box

32403

Driveway Markers
Meyer Driveway Markers are 4’ long, made of sturdy ¼” fiberglass to withstand winter elements. They are flexible, designed to bend virtually in half and return to their original position. Designed of highly reflective florescent orange along with a specialized reflective tape make them highly visible during a storm or after dark.
Learn more

Driveway Markers

03240 Bundle of 100

03242 Insertion Tool

ShurTrax Ballast Solution
To improve the ballast of your plow & truck ShurTrax is the easy, safe way to add up to 400lbs traction weight to trucks and SUV’s. Just fill the super-tough, woven mesh reinforced ballast bag with water from your garden hose, and you’re ready to go. It’s designed to freeze and has been tested to -40 degree F/C. Unit is designed to lie flat in the bed and is tough enough to support 500lbs. of cargo. Ship per each.
Learn more

Replacement Bulbs

LW-0048 (Compact/SUV truck)

LW-0056 (Full size pick-up truck)

Plow Cart
Moving and/or maneuvering a fully assembled plow can be a difficult task! However with the Meyer EZ-Cart; moving a plow is EASY. Plow carts are highly mobile custom cradles that allow anyone to move an unattached plow quickly and easily. Now, move your plow around as easily as your gas grille with the Meyer Plow cart. Choose the correct cart for your specific plow. Plow carts come as one (1) unit and come with all hardware and instructions for an easily installation.

Model	Part Number
EZ Mount Plus & MDII	QMB-JB
EZ-Mount Lift Frame	QME-SB
EZ Mount Classic	QMB-ST
EZ-Mount Classic Lift Frame	QME-ST

Meyer Sno-Flo Industrial Paint
Our specially formulated paint is designed to improve snow-rolling action and withstand the harsh operational environment. Meyer Yellow, Black & White Primer is available in aerosol spray cans (12/case) and Meyer Yellow Brush Paint is available in 1 quart cans (4/case) that can be shipped via UPS.

Industrial paint
Brush Yellow:	08755 (4/1qt cans/case)
Spray Case Yellow:	08677 (12 cans/case)
Spray Case Black:	08676 (12 cans/case)
Spray Case White Primer:	08841 (12 cans/case)

Meyer M1 Hydraulic Fluid
Keep your hydraulic unit operation at factory performance by using OEM M1 Hydraulic Fluid. Meyer M1 Hydraulic fluid is scientifically formulated to synchronize with internal components to withstand the extreme temperatures of the summer and winter. Meyer’s exclusive additives maximize performance and longevity of the complete operating system. M1 Hydraulic Fluid is guaranteed to perform at temperatures -40 degrees. It is recommended that you drain the M1 Hydraulic in the spring, fill and store the unit with Hydra-Flush over the summer & re-fill with new M1 Hydraulic fluid in the fall.

Note: using other hydraulic fluids or additives voids your warranty and may permanently damage your unit. Comes in case/box of 12 and includes easy pour spout or by the bottle.

Hydraulic fluid

15487 (case of 12)

15614 (55 gallon drum)

Meyer M2 Hydraulic Flush
Keeping your hydraulic unit internally clean is as important as keeping your engine clean. Meyer’s M2 Hydraulic Flush is designed to scrub the internal components and flush away all impurities that may have developed in the system. Our exclusively designed M2 Flush is designed to perform without harming seals, connectors or hydraulic ports. It is recommended that you drain the M1 Hydraulic in the spring, fill and store the unit with Hydra-Flush over the summer & re-fill with new M1 Hydraulic fluid in the fall. Comes in case/box of 12 and includes easy pour spout or by the bottle.

Hydraulic flush

15902 (case of 12)

15903 (5 gallon pail)

15904 (55 gallon drum)

Meyer Dielectric Grease
Prevent your valuable system from the harsh elements of the winter with Meyer’s dielectric grease. Meyer’s dielectric grease is specially formulated to coat and protect electrical connections from deteriorating elements such as salt and road grime. It is recommended to coat all electrical connections prior to winter and each time you re-connect to ensure optimal performance. Grease comes per each, 2.7oz tube.

Dielectric Grease

15632