Lot Pro Accessories

    Plow Accessories

    Back to top
    Full-Trip Steel Cutting Edges (standard equipment)

    Full-Trip Steel Cutting Edges (standard equipment)

    Meyer steel cutting edges are scientifically designed to meet the demands of a tough environment. Our unique, heat-treated specifications are derived from years of testing to provide long-lasting performance. Meyer moldboards and cutting edges are pre-drilled and ready for installation. Cutting edges are sold as complete kits or separately as required.

    Note: Complete Kits come with all hardware in order to install.
     
    Full-Trip Carbide Cutting Edge

    Full-Trip Carbide Cutting Edge

    Heavy-duty, carbide-tip cutting edges significantly extend cutting edge life and deliver superior scraping performance. Once a side is worn, simply reverse the cutting edge for extended life. Meyer moldboards and cutting edges are pre-drilled and ready for installation. Cutting edges are sold as complete kits or separately as required.

    Note: Carbide cutting edge come in two pieces. The 10-footer comes in two 5-foot sections.  Both sections are included when ordering a "complete kit" or "cutting edge only."
    Full-Trip Rubber Cutting Edge Kit

    Full-Trip Rubber Cutting Edge Kit

    Today’s pros are faced with low-noise requirements and a variety of delicate surfaces. Meyer rubber cutting edges are designed to eliminate noise while providing maximum protection to the surface. Our 1.5-inch thick edge is formulated for long life. All Meyer rubber cutting edges are also reversible to extend cutting edge life, once a side is worn, simply reverse it for extended use. Meyer moldboards and cutting edges are pre-drilled ready for installation. Cutting edges are sold as complete kits or separately as required.

    Note: Complete Kits come with all hardware in order to install.
     
    Full-Trip Polyurethane Cutting Edge Kit

    Full-Trip Polyurethane Cutting Edge Kit

    Today's pros are faced with many requirements and stipulations from their customers. Polyurethane cutting edges provide the rigidity of steel edges and the noise reduction of rubber edges, all while protecting sensitive surfaces. Our one-inch thick edge is formulated for long life. Meyer moldboards and cutting edges are pre-drilled ready for installation. Cutting edges are sold as complete kits or separately as required.

    Note: Complete Kits come with all hardware in order to install.
     
    Meyer Heavy-Duty Deflectors

    Meyer Heavy-Duty Deflectors

    Made of rigid polyethylene, Meyer Heavy-Duty Deflectors reduce blow-back on the windshield and accentuates the snow-rolling action. The 45-degree angle end-cut helps throw snow more precisely and quicker for a cleaner scrape. Meyer moldboards are pre-drilled and ready for deflector installation. Deflector complete kits come ready-to-install with hardware bag and steel mounting belt. Components also sold separately as required. 

    Note: Complete Kits come with all hardware in order to install.
     
    Meyer Rubber Snow Deflectors

    Meyer Rubber Snow Deflectors

    Made of pliable rubber, deflectors keep snow flume down and away from the windshield and accentuate the snow rolling action. Meyer moldboards are pre-drilled and ready for deflector installation. Deflector complete kits come ready-to-install with hardware bag and steel mounting belt. Components also sold separately as required.

    Note: Complete Kits come with all hardware in order to install.
     
    Meyer Poly Snow Deflectors

    Meyer Poly Snow Deflectors

    Made of pliable poly, these deflectors keep snow flume down and away from the windshield and accentuate the snow-rolling action. Meyer moldboards are pre-drilled and ready for deflector installation. Complete deflector kits come ready-to-install with hardware bag and steel mounting belt. Components are also sold separately as required. 

    Note: Complete Kits come with all hardware in order to install.
     
    Edge Curb Guards

    Edge Curb Guards

    Protect the edge of your Meyer plow from driver abuse and hidden obstructions. Made with 3/8-inch steel, easy to install with pre-drilled hole pattern, curved and contoured for a perfect fit. Comes as a set (2) and are interchangeable/reversible side to side. Ships with mounting hardware and installation instructions for an easy install. 
    • Curb Guards

      • Curb Guards 08344 $444.68
    Multi-Position Wings –Meyer EZ-Wing™

    Multi-Position Wings –Meyer EZ-Wing™

    Multi-position, all-steel wings greatly improve the performance and efficiency of your Lot Pro moldboard. Each wing can be positioned independently to create a box, scoop or straight-blade configuration (up to nine positions) with the pull of one pin. EZ-Wing MPs add nearly 2.5 feet of overall length to Lot Pro moldboards. Fits all Lot Pro and AG moldboards 7.5-feet through 10-feet. Installs with no moldboard modification and assembles with pins for quick removal or bolts for long-term use. Comes as a set (2) left and right. Hardware and mounting instructions included.
    Fixed-Position 45-Degree Wings

    Fixed-Position 45-Degree Wings

    Meyer one-position steel wings extend the moldboard 10-inches on each side. Now you can move more snow quicker and faster than ever before. Fits all Lot Pro and AG moldboards 7.5-feet through 10-feet. Installs with no moldboard modification and assembles with pins for quick removal or bolts for long-term use. Comes as a set (2) left and right. Hardware and mounting instructions included.
    Box Wings

    Box Wings

    Designed to convert all steel and poly Lot Pro and AG moldboards into a push plow. Features reinforced design with heavy-duty rubber cutting edge. Installs with no moldboard modification and assembles with pins for quick removal or bolts for long-term use. Fits all Lot Pro Steel & Poly. Comes as a set (2) left and right. Hardware and mounting instructions included.  Part #08370
    Trip-Dampening Kit

    Trip-Dampening Kit

    The Meyer Trip-Dampening System is designed to help cushion the impact of the moldboard's tripping action, both the forward and return actions. It is not intended to eliminate or diminish the tripping action, which is an integral feature of a full-trip moldboard. Rather, the system reduces the impact of the tripping-action, saving wear and tear on the operator and the vehicle. The Trip-Dampening System is easy to install and comes with hardware and installation instructions.Complete Kit includes a left side and right side shock kit.  All kits come with all hardware in order to install.

    Note: This plow accessory is used with the EZ-Mount Plus System only. It cannot be used with the Standard Operating System or the Deluxe Operating System.
    Snow Shoes Lot Pro

    Snow Shoes Lot Pro

    Meyer Lot Pro Snow Shoes are designed to set the scrapping height of the cutting edge. It is common for the edge to run ½-inch to 1-inch higher than the surface when plowing gravel driveways/lots or other ground-sensitive surfaces. The Lot Pro shoe is a heavy-duty steel cast for maximum longevity and durability. The mushroom design will rotate 360 degrees eliminating hang-ups or catching of unwanted objects. In addition, the mushroom design is convenient for back-dragging applications. Fits all Lot Pro moldboards. Shoes come per each (1) and include all mounting hardware for easy installation. 
    Plow Markers

    Plow Markers

    Meyer’s heavy-duty plow markers allow the operator to see the edge of his plow from the cab providing maximum visibility for increased performance and safety. They are made from solid tubing and are flexible, but durable to withstand the winter environment. Markers are pre-drilled to fit the moldboard, so no drilling is necessary. Markers are shipped two (2) per set and include all mounting hardware and instructions for easy, do-it-yourself installation.  Part #09916
    Nite Saber® LED Lights

    Nite Saber® LED Lights

    With advanced features and state-of-the-art design, Meyer® Nite Saber® LED lights allow maximize visibility for safer plowing.  Features include:  four headlight system, integrated heat grid, wrap-around turn signal design, large access rear door, high output harnessing system and 180-degree adjustable stainless steel bracket. Lights ship as a left and right set including all hardware and instructions for quick installation

    CONTROLLERS

    Back to top
    Pistol Grip Controller with Hands-Free Plowing (HFP)

    Pistol Grip Controller with Hands-Free Plowing (HFP)

    Meyer’s pistol grip controller features HFP to reduce effort and increase performance and safety. When activated, HFP uses the vehicle's shift lever to control the up/down movement of the blade. The pistol grip controller features one-button functionality, illuminated buttons and self-diagnostics. Double-click technology allows the user to press a button twice, and the blade automatically goes left/right or up/down. This controller retrofits back to replace Meyer Touch Pad Controller (22154). Unit comes with instructions and adapter for an easy, do-it-yourself install.  

    Note: Scroll down to view Meyer controller mounting accessories.
    Touch Pad Controller

    Touch Pad Controller

    Intuitive design with large, illuminated raised rubber indicator arrows for ease of use. Convenient indicator lights make it simple to see the status of the plow. Unit comes with instructions and hardware for an easy, do-it-yourself install. 

    Note: If replacing original touch pad 22125 you need to order a 08644 adapter plug in addition to the 22154.  If replacing original Pistol Grip (22690 or 22690X) with Touch Pad 22154 you need to order a 07691 adapter kit in addition to the 22154.
    Joystick Cradle Mount

    Joystick Cradle Mount

    The Joystick Cradle mount is custom-designed for the Meyer Joystick Controller. The unique design allows the joystick to snap into place docking the unit in a safe and useful position. It mounts virtually anywhere on the dashboard or with the Floor Mount (sold separately). Installation is quick and easy. Joystick cradle mount comes with mounting hardware for an easy do-it-yourself install. 
    Pistol Grip Cradle Mount

    Pistol Grip Cradle Mount

    The Pistol Grip Cradle mount is custom-designed for any Meyer Pistol Grip Controller. The unique design allows the Pistol Grip to snap into place, docking the unit in a safe and useful position. It will mount to the dashboard or with the Floor Mount (sold separately) with convenient mounting screws that come with the Pistol Grip Cradle Mount. Installation is quick and easy. Unit comes with mounting hardware for an easy, do-it-yourself install.
    45-Degree Cradle Adapter

    45-Degree Cradle Adapter

    The 45-Degree Cradle Adapter provides added flexibility and functionality to your mounting placement. The 45-degree angle adapter positions your controller in a more convenient location depending on the mount location you desire. This angle adapter works with both the Pistol Grip and Joystick cradle mounts. The unit mounts to the dashboard with heavy-duty grip tape or screws. Installation is quick and easy. Unit comes with mounting hardware and tape for an easy, do-it-yourself install.
    • 45-Degree Cradle Adapter

      • 45-Degree Cradle Adapter 22815 $41.88
    Floor Mount

    Floor Mount

    The Meyer articulating Floor Mount provides maximum ergonomic flexibility to mount the controller close to the operator. The 10-inch or 20-inch flex-articulating arm moves virtually wherever the operator desires. Works perfectly with all three models: Joystick, Touch Pad and Pistol Grip. The unit mounts conveniently to the floorboard. Unit comes with mounting hardware for an easy, do-it-yourself install.
    • Floor Mount

      • Floor Mount (20") 22844 $250.00

    Other Accessories

    Back to top
    Hotshot Hand-Held Crank Spreader

    Hotshot Hand-Held Crank Spreader

    This professional spreader holds up to 5 pounds of ice-melt products. It's easy to use: Set the dial, pull the trigger then rotate the lever in a clockwise position. To stop material output, simply let go of the trigger. Spreads ice-melt, fertilizer or seed for true four-season performance.
    • Hotshot Hand-Held Crank Spreader

      • Hotshot Hand-Held Crank Spreader (6/case) 38196 $177.19
    Driveway Markers

    Driveway Markers

    Meyer Driveway Markers are 4-feet long, made of sturdy ¼-inch fiberglass to withstand winter elements. They are flexible, designed to bend virtually in half and return to their original position. Designed of highly reflective florescent orange along with a specialized reflective tape make them highly visible during a storm or after dark.  100 Bundle Part #03240, Display Stand 03243
    The Big Yellow Box

    The Big Yellow Box

    The Meyer Big Yellow Box is the perfect companion for your fall, spring, summer and winter needs. The unit features 8 cubic feet of storage and is made of double-walled polymer that is virtually indestructible. Perfect for storing sand/salt, power tools, sports equipment, pool supplies and tools or garbage. Unit will not rust and comes lock-ready (lock is sold separately). Forklift pockets are built in to move the unit when full of material. Unit is 32-inches wide, 23-inches deep and 30-inches tall. No assembly required.
    • The Big Yellow Box

      • The Big Yellow Box 32403 $350.00
    Plow Cart

    Plow Cart

    Moving and/or maneuvering a fully assembled plow can be a difficult task! However, with the Meyer EZ-Cart; moving a plow is EASY. Plow carts are highly mobile custom cradles that allow anyone to move an unattached plow quickly and easily. Now, move your plow around as easily as your gas grill with the Meyer Plow cart. Choose the correct cart for your specific plow. Plow carts come as one (1) unit and come with all hardware and instructions for an easily installation.

    Shovels - Pushers - Rakes - Spreaders

    Back to top
    Meyer Contractor Shovel & Pro-series Pushers

    Meyer Contractor Shovel & Pro-series Pushers

    Whether clearing sidewalks, pathways, or digging out your vehicle after a major snowstorm, the American-made 30” or 36” Pro-series Pushers and 26” Meyer Contractor shovel are built to provide the ultimate snow clearing performance you’ve come to expect from the Meyer brand.  Pushers feature 30” or 36” unbreakable poly blade, reinforced shovel head for heavy snow, 42” fiberglass shaft and ribbed D-handle. Contractor shovel features tough 26” poly blade with galvanized steel scraper, 44” steel shaft & ribbed D-handle. Part # 92226: 26" Contractor Shovel (10 pack), Part # 95230: 30" Pro-Pusher (5 pack), Part # 95236: 36" Pro-Pusher (5 pack)
    Meyer Pro Edge Snow Rake

    Meyer Pro Edge Snow Rake

    This Meyer accessory is made from a foam-like polyethylene. The squeegee-like head never gets brittle, and doesn't absorb water, so it remains pliable to safely contour to your vehicle and efficiently remove snow. The pliable head also means no more scratching your vehicle's finish. It comes with a long handle so no matter how large your vehicle, the Meyer Pro Edge Snow Rake can reach the area you need to scrape.

    OIL - PAINT - GREASE

    Back to top
    Meyer Sno-Flo Industrial Paint

    Meyer Sno-Flo Industrial Paint

    Our specially formulated paint is designed to improve snow-rolling action and withstand the harsh operational environment. Meyer Yellow, Black & White Primer is available in aerosol spray cans (12 per case) and Meyer Yellow Brush Paint is available in 1-quart cans (4 per case) that can be shipped via UPS.
    Meyer M1 Hydraulic Fluid

    Meyer M1 Hydraulic Fluid

    Keep your hydraulic unit operation at factory performance by using OEM M1 Hydraulic Fluid. Meyer M1 Hydraulic fluid is scientifically formulated to synchronize with internal components to withstand the extreme temperatures of the summer and winter. Meyer’s exclusive additives maximize performance and longevity of the complete operating system. M1 Hydraulic Fluid is guaranteed to perform at temperatures -40 degrees and higher. It is recommended that you drain the M1 Hydraulic in the spring, fill and store the unit with Hydra-Flush over the summer & re-fill with new M1 Hydraulic fluid in the fall. 

    Note: using other hydraulic fluids or additives voids your warranty and may permanently damage your unit. Comes in case/box of 12 and includes easy pour spout or by the bottle. 
    Meyer M2 Hydraulic Flush

    Meyer M2 Hydraulic Flush

    Keeping your hydraulic unit internally clean is as important as keeping your engine clean. Meyer’s M2 Hydraulic Flush is designed to scrub the internal components and flush away all impurities that may have developed in the system. Our exclusively designed M2 Flush is designed to perform without harming seals, connectors or hydraulic ports. It is recommended that you drain the M1 Hydraulic in the spring, fill and store the unit with Hydra-Flush over the summer & re-fill with new M1 Hydraulic fluid in the fall. Comes in four quantities and includes an easy-pour spout. Learn more
    • Hydraulic Flush

      • Hydraulic Flush (12 bottles/case) 15902 $121.09
    Meyer Dielectric Grease

    Meyer Dielectric Grease

    Prevent your valuable system from the harsh elements of the winter with Meyer’s dielectric grease. Meyer’s dielectric grease is specially formulated to coat and protect electrical connections from deteriorating elements such as salt and road grime. It is recommended to coat all electrical connections prior to winter and each time you re-connect to ensure optimal performance. Grease comes per each, 2.7-ounce tube.
    • Meyer Dielectric Grease

      • Dielectric Grease 15632 $8.25
    Meyer Coolube

    Meyer Coolube

    Maintain Meyer equipment with our premium quality, multipurpose, non-soap-based grease. Meyer Coolube is specifically formulated to provide better lubrication in harsh conditions, perfect for higher speeds and lower temperatures. It holds up over a wider temperature range (-40 degrees to 440 degrees Fahrenheit) plus it works wet or dry. Available in 14-ounce tubes or 11-ounce aerosol cans.
    Meyer Chain & Cable Lube

    Meyer Chain & Cable Lube

    Maintain your Meyer equipment with our aerosol Chain & Cable lube. It is specially formulated to lubricate, preserve and protect chains and cables. This transparent heavy-duty, dry-film lubricant is formulated with the latest synthetic additives to ensure maximum penetration and protection against corrosion. Once applied, the solvent evaporates, leaving behind a film that will not attract dust or wash off. Available in 11-ounce aerosol cans.  Part #15186